Today I had the opportunity to get 2 more jersey samples done for MtnBikeRiders.com. We’re still in the process of getting the logo finalized. But in the mean time I had this set made for Jeremy and Joe.
Here’s how it looks.
First we have to get the image printed, then we place the jersey on a heat press.
After 40 seconds, you get this…
One these samples we did something special. We placed the site name on the rear tail. One is off the left corner, and other you see here is on the middle.
Here’s how that turned out.
We’re still working out the jersey as mentioned. The logo will be much bigger and the site name will also be more obvious. But for now you get the idea how the magic happens.
