I don’t give a Shift!!! (Rigid SingleSpeed Complete)

That’s my new motto for 2009 as I ride my Rigid Single Speed.  Finishing touches on my rigid singlespeed were done over the holidays.  Last component needed on this project were the disc brakes.  I found a killer deal on Avid Juicy 5s right before Christmas.  Top it off it was free shipping and arrived on Christmas Eve.  Other components added to this beauty are:

·       Ashima Air-rotors.  160mm in the front and 140mm in the rear.  Weight on these are 85 grams (f) and 67 grams (r) – Sweet!

                                                 160mm Front rotors

                                                              140mm Rear rotors

           ·       SASO Carbon Seat post

 

·    Salsa Seat Clamp (non QR)
·       WTB Pure V, w/Ti rails
·    Bebop pedals

Finishing up I hit several road bumps.  First was the Eccentric Bottom Bracket adjustment.  Fairly simple to adjust however unfamiliar to me I didn’t want to take a chance of ruining it before I could even ride it.  Second was play in my fork/headset/stem.  I’ve tightened all necessary bolts however there was still a little bit of play.  Turns out that there are two screws that need tightening on the compression plug (in-place of the star nut).  First a 5mm on the inner screw then a 6mm on the top-cap. 

These were both simple issues but new to me.  I went to my LBS – JensonUSA for assistance.  Props to Luis w/JensonUSA’s Corona store.  He is one of the most helpful guys I’ve ever met at a bike shop.  Very knowledgeable as well…

Here is the complete spec:

Frame:                ZION EBB
Fork:                   SASO Carbon fork
Spacers:              Carbon
Headset:             Woodman Axis SL COMP
Stem:                 B52s 
Handlebars:         KORE Torsion bars 
Grips:                  Red OURY Lock-ons
Brakes:               Avid Juicy 5s
Rotors:         Ashima Air Rotors 160mm(f) and 140mm(r)
Seat Post:           SASO Carbon Seat post
Seat Post Clamp:  Salsa
Saddle:               WTB Pure V Ti rails
Crankset:            Race Face Deus, silver
Bash Guard:        Race Face
BB:                     Race Face ISIS spline
Chain:                 SRAM PC991
Wheelset:           Sun Ringle laced to XT hubs
Single speed cog: 16t Wheels Mfg SSK-3
Skewers:             SASO Carbon levers
Tires:                  Maxxis Larsen TTs 2.1(f)/1.9(r)
Tubes:                 various brands
Pedals:               Bebop
Misc:                   FSA Compression plug
H2O Cage:           WOOdman Carbon Comp
Weight:              23.54 lbs

I’m sure adjustments or changes will be made after I ride this bike, but for now it’s ready to hit the dirt.