Update on the Double Banger Tandem Project
On the latest update we had for the tandem project, NickD over at DiBlasi Engineering finished up some of the welding that needed to be done. The fRead More…
Category: How To’s/Tech Tips
More Plasti-Dip fun
If you recall I showed you how I dipped Burt Reynolds. Burt has been Smurf’d For this How To/DIY, I took the left over Plast Dip Blaze that I haRead More…
Changing up your bike’s color with Plasti-Dip
I’m sure you’ve all heard of Plasti-Dip. It’s that rubber coating that you can dip your tools into so you’ll get a rubberized surface. If you have paiRead More…
Project Sidecar
You may have seen the most recent project we’ve been working on, if you haven’t then you’re in luck. This is a photo-rich article that will show you sRead More…
26″ Tube in a 29er wheel
If your 29er gets a flat and all you have a is a 26″ tube go ahead and use it! Check this out. The trick is to hold down one side of your wheelRead More…
Got a stinky helmet? Here’s how to get rid of that funk.
Here’s a couple of stinky helmets that haven’t been washed in a long time. I’m sure you’ve got one or two of them that smell like feet. All youRead More…
Double Banger Tandem Build Progress Report
The first order of business was to tack weld the eccentric bottom bracket (EBB), then build the jig. To make the new tubes used to extend tRead More…
Ghetto Tubeless follow up…3 years later!
A few years ago we did a video showing how we converted standard tires and rims to tubeless, or some might call it “Ghetto Tubeless.” Since then I’ve Read More…
I’ve got a bike project with half of a frame
If you recall this was the front triangle of the frame we used for our rear triangle on the Double Banger Tandem Project. Not wanting to have it go toRead More…
Checks and Balances
So get this…on Memorial Day, Lady P and I loaded up our 29ers and headed down to our favorite trail, Aliso Woods for some not so epic riding. As we’Read More…